Description
Remote commissioning is not a compromise. For control work — logic, sequences, HMI screens, drive parameters — a remote session with a competent person on site is faster and cheaper than flying an engineer in, and it can start the same week.
What the connection looks like
Typically an industrial VPN router on the machine network, or a remote desktop session onto an engineering laptop that is already connected. We work with whatever your IT department is comfortable approving, including connections that are opened only for the duration of a booked session and closed afterwards.
No permanent inbound access is required, and no connection is left open between sessions unless you ask for it.
What happens on site
Somebody has to be at the machine — usually your electrician or a mechanical fitter. They handle the physical side: pressing buttons, confirming movements, watching for anything that should not happen. We handle the program, the HMI and the drive parameters, and talk them through each step.
This split works well. The person on site does not need to know the PLC platform, and the engineer does not need to be in the building.
Where remote work stops
Anything that needs hands on the hardware — wiring faults, sensor alignment, mechanical adjustment — has to be done locally. We will say clearly when a problem has left the software domain rather than continuing to bill for remote hours.
